Alfa Clearout

[Bernard]

Thought i would go for something newer and more available, Ford 3ltr V6 out of ST220

Hi Skelly....that will be different...I will look forward to the build photos....good luck with it...Phil

[turbonutter]

Yes definitely a one off installation, so I guess its not an easy install - Hope it is all going well, It will be interesting to see when its done

[ProtoTipo]

Mmmmmmmm !!
http://www.stdrivers.co.uk/forum/upl...559-engine.jpg

[john]

And why not you have to ask?
At the first couple of shows we did with the ListerBell the ST220 engine was talked about quite a bit by prospective customers.
That was before Craig started thinking about Toyota engines of course.
But the Duratec has proven mid engined installation with Noble so following their cooling model would probably be a good idea.

[LPH_UK]

Good aftermarket of tuning parts for the Duratec 2.0, how is it for the V6? Something that isn't around for the Alfa that's for sure!

[Ken Tomblin]

mountune are good for tuning the Duratec and Jaguar AJ 30 v6 engines, good info on the Locost AJ 30 Web site, good power, rev to 8000 rpm and cheap parts!!!!!

[ProtoTipo]

mountune are good for the Duratec and Jaguar AJ 30 v6 engines, good info on the Locost AJ 30 Web site, good power, rev to 8000 rpm and cheap parts!!!!!

Aftermarket period looking cam covers are available for 4 pot Duratecs.
Some Jaguar badged ones would be good for this V6?