Thats not what my bearings look like, it only has a 3 point fixing, and looks deeper than the one in the photo.
Thats not what my bearings look like, it only has a 3 point fixing, and looks deeper than the one in the photo.
Maybe the 156/166 cassette idea hasn't happened yet on the kits, but it would be a very useful feature?Originally Posted by The Slug
What hubs/flanges are you using then Ian?
Chris no point you asking me tech question....lol
I can show you mind
Well, I don't know what it's from Ian, but it's a another type of cassette (three bolt fixing, rather than the 156/166 four bolt) with a five stud hub.
You must know the answer to my next question:
What PCD size of wheel can you fit? 5x108?
The 156/166 cassette is mentioned as a possible option on the LB website.
PCD you will need to ask Craig he is having the wheels made to suit but 5x110 rings a bell?
Ian,
The LB hubs are indeed 5 hole x 110 PCD (Vauxhall standard)
Dave
Sorry for the thread hijack but just to clarify..
For those opting to go with the LB wheels then we use the GM based drive flange which is a 5 stud but on 110pcd, for those who wish to opt for the 15" wheels which are available off the shelf in 5 x 98 or 5 x 108 there is an upright set which is machined to accept the 156/166 bearing Chris has highlighted above. With the Alfa set it is necessary to retain the drive flanges from the donor car if you have go this route (156 is 98 pcd, 166 is 108pcd) whereas the GM set come with integral flanges thus eliminating the need for the donor parts.
Regards
Craig
Posting Permissions
Reply With Quote
Bookmarks