Tim,
still haven't had a reply...….. Not sure if you know, but mine were cut in stainless steel, and the webs between the letters were relieved by 1mm
Griff
I am about to get the STRATO'S letters laser cut in 2mm think Aluminium to customise my Alfa plenum chamber a la Griff. The letters will be 35mm high and the "'" will be 4mm high - see diagram. These will be bare metal so you can powder coat/paint/polish to suit
I will be making 5 extra sets and these can be had for £40 including postage (to UK mainland). (Each Set is 2xS, 2xT, 1xR,A,O,')
Please let me know if you would like to reserve a set.
PM me or reply to this thread.
Thanks
Tim
Last edited by Lancialulu; 09-11-2019 at 17:32.
Tim,
still haven't had a reply...….. Not sure if you know, but mine were cut in stainless steel, and the webs between the letters were relieved by 1mm
Griff
They'd look pretty good on mudflaps too !
Bookmarks