Coil Spring Isolator Pads

**Phubb** · 06-10-2020, 18:16

Well mine are somewhat shot so anything would be an improvement.
This is one on a very long list of things to do to get my Allora back on the road so no rush for them.
Keep me updated.
Thanks

**ProtoTipo** · 06-10-2020, 20:20

Originally Posted by Phubb

Well mine are somewhat shot so anything would be an improvement.
This is one on a very long list of things to do to get my Allora back on the road so no rush for them.
Keep me updated.
Thanks

I think there's a good bit of life in them.
I just need to get the other spring off to be certain.
If the top and bottom spring isolators are interchangeable, it would be best to swap them round, because one seems to have an easier life.

**Phubb** · 07-10-2020, 10:32

Thanks for the update. Let me know when you have them removed.
I'm not sure if the top and bottom are interchangeable but I'm willing to bet yours are in better condition than mine.

**ProtoTipo** · 08-10-2020, 08:19

Here's some photos of the two Beta Spring rubber seats that I had already removed:
They are identical, top and bottom.
I've shown the issue with one, the other is perfect. 'Need a good clean.