Results 1 to 9 of 9

Thread: Coil Spring Isolator Pads

  1. #1
    SEC Member
    Join Date
    Feb 2015
    Location
    Northampton
    Posts
    19
    Rep Power
    0

    Coil Spring Isolator Pads

    I'm after a set of the rubber coil spring pads for Lancia Beta front shocks if anybody has them laying around.
    Thanks

  2. #2
    Site Supporter ProtoTipo's Avatar
    Join Date
    Sep 2011
    Location
    Outer Mongolia
    Posts
    3,572
    Rep Power
    45

    Re: Coil Spring Isolator Pads

    I have a whole pair of Beta Coupe front struts and springs. I need the tops.

    I've taken the top off one, and the bottom isolator ring has two cracks. The upper one is fine.
    I would expect the other pair of isolator rings to be similar, but I've not compressed the spring and taken the top off the other one yet.

    I wouldn't surprised if someone else has some of these, somewhere?

    I'll take the other strut top off, when I get a minute, and take photos of all the isolator rings.
    'Might take me a few days.
    Last edited by ProtoTipo; 05-10-2020 at 08:51.

  3. #3
    SEC Member
    Join Date
    Feb 2015
    Location
    Northampton
    Posts
    19
    Rep Power
    0

    Re: Coil Spring Isolator Pads

    Well mine are somewhat shot so anything would be an improvement.
    This is one on a very long list of things to do to get my Allora back on the road so no rush for them.
    Keep me updated.
    Thanks

  4. #4
    Site Supporter ProtoTipo's Avatar
    Join Date
    Sep 2011
    Location
    Outer Mongolia
    Posts
    3,572
    Rep Power
    45

    Re: Coil Spring Isolator Pads

    Quote Originally Posted by Phubb View Post
    Well mine are somewhat shot so anything would be an improvement.
    This is one on a very long list of things to do to get my Allora back on the road so no rush for them.
    Keep me updated.
    Thanks
    I think there's a good bit of life in them.
    I just need to get the other spring off to be certain.
    If the top and bottom spring isolators are interchangeable, it would be best to swap them round, because one seems to have an easier life.

  5. #5
    SEC Member
    Join Date
    Feb 2015
    Location
    Northampton
    Posts
    19
    Rep Power
    0

    Re: Coil Spring Isolator Pads

    Thanks for the update. Let me know when you have them removed.
    I'm not sure if the top and bottom are interchangeable but I'm willing to bet yours are in better condition than mine.

  6. #6
    Site Supporter ProtoTipo's Avatar
    Join Date
    Sep 2011
    Location
    Outer Mongolia
    Posts
    3,572
    Rep Power
    45

    Re: Coil Spring Isolator Pads

    Here's some photos of the two Beta Spring rubber seats that I had already removed:
    They are identical, top and bottom.
    I've shown the issue with one, the other is perfect. 'Need a good clean.
    Attached Thumbnails Attached Thumbnails Beta Spring Rubber 1.jpg   Beta Spring Rubber 2.jpg   Beta Spring Rubber 3.jpg  

  7. #7
    SEC Member
    Join Date
    Feb 2015
    Location
    Northampton
    Posts
    19
    Rep Power
    0

    Re: Coil Spring Isolator Pads

    I haven't removed the ones on my car yet but I can see they are not as good as yours so if you are happy to sell them I would be happy bunny !

  8. #8
    Site Supporter ProtoTipo's Avatar
    Join Date
    Sep 2011
    Location
    Outer Mongolia
    Posts
    3,572
    Rep Power
    45

    Re: Coil Spring Isolator Pads

    Quote Originally Posted by Phubb View Post
    I haven't removed the ones on my car yet but I can see they are not as good as yours so if you are happy to sell them I would be happy bunny !
    You can have them for free Peter.

  9. #9
    SEC Member
    Join Date
    Feb 2015
    Location
    Northampton
    Posts
    19
    Rep Power
    0

    Re: Coil Spring Isolator Pads

    Thanks Chris - PM sent

Similar Threads

  1. 12v ecu, loom, coil.
    By strat24v in forum For Sale
    Replies: 0
    Last Post: 24-09-2015, 09:59
  2. Brake Pads
    By AndyH in forum Stratos Forum
    Replies: 18
    Last Post: 03-09-2014, 13:09
  3. FIA Battery Isolator
    By hollytree in forum Electrical and Gauges etc
    Replies: 3
    Last Post: 19-04-2012, 22:17
  4. Beta brake pads
    By ah_sprite in forum Brakes
    Replies: 7
    Last Post: 06-04-2012, 11:37
  5. brake pads 12v / 24v
    By pim in forum Brakes
    Replies: 1
    Last Post: 31-01-2012, 22:44

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •