Got a wink on

[Jamo12t]

Thanks, the relays and fuses weren’t in situ so I’ve had some fun but got purple as continual 12v, red 12v unless headlights on and then orange becomes 12v. Just need to loop in sidelight feed as LB has separate sidelights where mine are in the bowl.

think I have a plan but will give you a shout if I get stuck.

thanks

james

[Stableblock]

should have said to ignore the colours on the diagram, they wont match the LB loom.

Peter

[Jamo12t]

Thanks Peter & Craig, two relays in each pod worked for me, maybe could have been done with 1 but it's working now.

I've posted a video on facebook as not sure how to attach in this forum. Also used Guy's advice on adjustments to the positioning, a little more work to do but happy to have them working now.

What got me to start off with was the common coming from the motor, didn't know this was an output rather than input and it didn't help the spare motors I was playing with don't seem to work!

Thanks guys - sure I'll have some more questions soon!

[NoCorseChris]

This thread:

https://www.stratosec.com/Forum/show...dlights-A-PITA

covers the fundamentals of how they should work in excruciating detail….once you understand how they are supposed to work, making them behave is simple enough.

The Ford/Mazda parts use the exact same technique but spread the components about differently so they can seem quite different.