Hello, I used a similar approach. You will also need a feed from headlamp main beam otherwise the pods will stay down when you flash the lights and a couple of diodes (1N5406) or you can get inline diodes such as Universal In-line Diode (autoelectricsupplies.co.uk) which dont require any soldering.
Here is the circuit I used. It sounds similar to yours but as you only have one side working I would check your wiring carefully and check the diodes on the motors. If the diodes are original then I would replace with with 1N5406 which are more highly rated. Be sure to get the diodes the right way round. Also there are two sorts of changeover relay connections, you may have different ones. Look at the markings carefully.
Bookmarks