Ferrero Steering Wheel

[ProtoTipo]

Gerry makes a copy of the original wheel, ?440 plus VAT & carriage and you need a boss to fit it to your column. Same size as an original and I think he's got limited stocks at the moment.

Is the pcd 74mm now Guy?
They were 75mm.

For 74mm, if you have an X1/9 column, you need one of these
For 75mm, you'll also need one of these
The above adapter ring will also fit this MOMO to X1/9 hub
'No need to buy the Personal/Nardi size hub, if the pcd is 75mm.

I may have some of the above hub and adapter ring parts.

[Guy Mayers]

Any customer would have to check with Gerry Chris, I don't have that information and he's a lot closer to the stock than I am!

[ProtoTipo]

Any customer would have to check with Gerry Chris, I don't have that information and he's a lot closer to the stock than I am!

I understand Guy.
There's a solution for either pcd size, in any case.

[Kenny m]

Looks like the one you got me Chris

[ProtoTipo]

Looks like the one you got me Chris

Yes Kenny, identical.
I also got one for the 1975 works Safari car.

[shakey5]

https://www.subito.it/accessori-auto...-545278697.htm

2 spoke Munari wheel here, but again not cheap at 1500?