Intake System for Alfa 3.0V6 12V

[fulviafriend]

Hi Mark
I have some 24V induction bits I dont need, if there any use let me know.
cheers
Graham

Hi Graham,

I'm not sure what is interchangeable between the two (anyone help here?), will do a little research and let you know…

Many thanks, Mark.

[Guy Mayers]

Hi Mark - I've got some spare chrome inlet runners and rubber joints to connect to the plenum chamber if you need some.

Guy

[fulviafriend]

Hi Mark - I've got some spare chrome inlet runners and rubber joints to connect to the plenum chamber if you need some.

Guy

Hi Guy, will check all the joints etc for cracking and see whats needed, have just be looking for the obvious stuff so far. The engine is pretty good overall (pulls and runs very well) its just age/weather effects on flexible pipes/couplings that seem to be the main issues.

Thanks for the offer, will get back to you if needed.

Cheers, Mark.

[fulviafriend]

Hi Mark - I've got some spare chrome inlet runners and rubber joints to connect to the plenum chamber if you need some.

Guy

Hi Guy,

Checked all joints etc and all seems OK, but my chrome runner are looking a little sad.

How much for the bits mentioned? Need to watch my budget as there are many other higher priority jobs to do.

Many thanks,
Mark.

[Guy Mayers]

PM sent Mark!