GB Panel Alignment Set

[sdebez]

Would you mind measuring the spacing of the slots please

[sdebez]

Or can I have the left overs please

[ProtoTipo]

Hi Sach,

I'd forgotten I'd already sent you a .pdf. of the drawings.
You needed measurements.
Maybe a hard copy might be best?

Chris

[ProtoTipo]

Does anyone need some of these brackets?:

Jeff in the US needs 4. They would need to be laser cut and tig (or gas) welded, and plated.
I can supply a CAD file if needed.

I don't have any of these brackets. Someone would have to get them made.
I do have a lot of the other alignment parts.

See larger photo to show what I have, and haven't got:

[pab56]

Hi Chris
I am interested in a couple of car sets of all parts or whatever you have plus drawings, if thats OK.
Best regards

[ProtoTipo]

Hi Chris
I am interested in a couple of car sets of all parts or whatever you have plus drawings, if thats OK.
Best regards

I'll send you an email Paul.

[VeloceWhippet]

Hi Chris,

I made a set of these from the drawing you sent me.


What I'm going to need to make is a set of these:


I'm hoping that you might have a drawing.

Thanks,
Jeff

[ProtoTipo]

Hi Jeff,
I've got one side of those still left, but Paul B. might be buying it, and possibly making more, but I've not heard back from him yet.

Did you get the new brackets laser cut?

[VeloceWhippet]

These were simple enough that I just used a metal shear. Then I clamped them onto my small mill and milled the slots and drilled the hole.

Found out the hard way, that the first plate of 18GA Steel that I used must have been work hardened and not annealed when it was manufactured.
That set of brackets all broke when I tried putting a 90 degree bend on them.

My next set (after buying some plate stock from a different source) bent as expected.

My TIG skills are not practiced enough. So, I MIG welded them and did some cleanup to make them somewhat presentable.

[ProtoTipo]

So all hand made? Very good.