I have fixed 2 captive nuts in the rear of the quad pod cover and I used to have a full size plate on there, but it really screws the graphics.
I made up 2 brackets (same width as full size plate) in the radiator inlet and used to have a full size plate there - never had any overheating though!
I got a smaller plate made up and fitted an alloy bar between the brackets and fitted my smaller plate to that - vanity
I normally take the small plate off and put the full size plate on at MOT time, but forgot yesterday. Got a PASS no problem.
It was only reading your post reminded me about legality
Reply With Quote
Bookmarks