2.5 24 valve head

[john]

Just putting it here for widest circulation, but if anyone has a scrap front head I would be interested in acquiring it. No particular hurry.

[LPH_UK]

I have a pair of 3 litre heads with cams but with some damaged valves. One has the cams and lifters out the other is assembled.

[john]

Thanks Leigh. Any chance of a photo of the front head?

[LPH_UK]

Hi John

Should be able to get one later or by the weekend at the latest. The 'front' is the one with the oil filler cap yeah?

Leigh

[john]

That's the one Leigh. Thanks. No hurry.

[LPH_UK]

Hi John, dug it out what do you need pics of?

[john]

Top surface please Leigh. Without the cam covers on, but I'm assuming that is how you have it! Thanks.

[LPH_UK]

Yep it's in bits. There are no cams in it. I'll take a pic tomorrow.

[Fingers]

Just saw this thread. I’ve got a couple of sets of 2.5 heads in the garage, but it’s a bit far to drive to drop them off. Here?s a picture instead.

[john]

Thanks Paul. For sure a little too far for delivery or collection!
I don't know enough about these castings to discern if there is any difference between 2.5 and 3.0 so would still be good to see the 3.0 heads Leigh if you can manage that.