Hawk Suspension Washers

[ProtoTipo]

Hi Chris, happy to machine some for you if you can find the dimensions, I should have a bit of stainless kicking around.Dave

Thanks for the offer Dave, but I can make them if I need to.

Front or rear suspension ? I can check as they are probably fitted to SAR518R it still has original Transformer suspension.

Thanks Paul,
If you could have a look at the washers on the rear (photo of my old orange car attached). Although now that I've found that photo, I could probably scale it from that.
If possible could you see roughly what type of washers are either side of the front lower arm bush? I'm sure there must be some, but I've never worked on the front end of a car with the older type bushes, 'only had the rear in bits.

Thanks for the help, both.

There's no mad rush with this. It's just that I'm putting the suspension wheels and steering on the car, temporarily, to move it to the painters. Fitting the suspension together just reminds me of any bits and pieces I need to sort out, and/or are short of.