Turning the chassis 3d cad model into metal…..
Bronze welded using a gas fluxer.
bead blasting to remove the flux residue
boring the steering head in the mill
3 frames after powder coat
below coping the tubes ready for the steering head
Turning the chassis 3d cad model into metal…..
Bronze welded using a gas fluxer.
bead blasting to remove the flux residue
boring the steering head in the mill
3 frames after powder coat
below coping the tubes ready for the steering head
Last edited by Involute; 11-06-2025 at 18:35.
Posting Permissions
Reply With Quote
Bookmarks