Geometry settings

[john butts]

Has anyone got any settings for tracking, castor, camber,front and rear on 15" wheels???
regards John Butts

[The Slug]

Front axle		LH Wheel		RH Wheel
		M.v.	A.v.	M.v.	A.v.
Partial Toe	mm	+14.0	+0.6	+16.2	+0.60
Total Toe	mm	+30.2	+1.20	-	-
Set-Back	dg	+0.02	-	-	-
Camber	dg	+0.34	-0.26	-1.10	-0.26
Caster	dg	+4.12	+4.48	+4.52	+4.20
King-pin	dg	+5.06		+6.28	-
Included Angle	dg	+5.40		+5.16	-

[The Slug]

Rear Axle	LH Wheel			RH Wheel
		M.v.	A.v.	M.v.	A.v.
Partial Toe	mm	-6.40	+1.20	-8.20	+0.80
Total Toe	mm	14.6	+2.00	-	-
Thrust Angle	dg	-0.08	-0.02	-	-
Camber	dg	-0.22	-1.18	-1.00	-1.00

[mel lewis]

Found this on the old site
Hawk castor and camber settings

---

I'm just looking at the (professionally set up) figures that Don Bunn gave for his Transformer in 1998. Slightly different each side for some reason, so I've taken an average.

Front
Camber -1°04'
Castor +4°35'
Toe +0°01'

Rear
Camber -0°58'
Toe -0°33'

Those were the figures given, I'm not recommending them.
I didn't post them alongside the Corse figures to avoid confusion.

[Sando]

I'll recommend the Don Bunn figures Mel - very similar to what I use. ( not sure about yours though Ian ! )
Good starting point John, you won't go too far wrong with that. Maybe a touch of toe in at the front but that always depends on driving style and how you like the car to feel on turn in.
Set your ride height first.. . . . .
Rob

[The Slug]

I'll recommend the Don Bunn figures Mel - very similar to what I use. ( not sure about yours though Ian ! )
Rob

Not mine Rob, from John's own note's that he has lent me and original settings from Chris Smith.

[ProtoTipo]

Found this on the old site
Hawk castor and camber settings

---

I'm just looking at the (professionally set up) figures that Don Bunn gave for his Transformer in 1998. Slightly different each side for some reason, so I've taken an average.

Front
Camber -1°04'
Castor +4°35'
Toe +0°01'

Rear
Camber -0°58'
Toe -0°33'

Those were the figures given, I'm not recommending them.
I didn't post them alongside the Corse figures to avoid confusion.

Who wrote that rubbish?

[mel lewis]

Who wrote that rubbish?

??????????????????? you come across some strange things on the old site when you havnt got your gun !!!!