heres a pic of my lay out, almost similar to the original but LHD:
from left to right:
two small warning lights ( high beam and indicator )
pull switch lights
reostat dash lights
Voltage gauge ( low in dash )
oil pressure gauge ( slightly higher )
rev counter
temperature gauge
pull switch fan override ( below temp gauge )
speedo small
ampere gauge (top left )
fuel gauge ( top right )
handbrake warning light ( red, also brake fuel level )
toggle switch for choosing fuel pumps left right ( right from handbrake warning light )
pull switch contact ( below from handbrake warning light )
push button for starting ( right from contact )
4 pull switches below each other, from top to bottom: frontspot lights, front wide beams, rear fog ( or reverse with the original ), heater fan
emergency pull swirch at the top of dash
heater control ( below emergency switch )
2 reostats ( stop watch/Halda and map reader light )
2 stop watches with light in the middle ( not seen on the picture but below the 2 reostats )
Halda (top of dash )
the fuse box (below Halda)
relays ( i think 10, under the dash below the fuse box )
brake proportion valve ( below the dash under the heater control )
Bookmarks