Those unions all unscrew out of the plenum easily, I've swapped mine around to suit my set up, and blanked one off. I'll take a close up photo later on, I think there are a couple in my build thread that will show waht I've done.
Paul.
Sat in a real one, may never wash again!
Last edited by Stratie.fr; 26-01-2017 at 20:32.
Paul.
Sat in a real one, may never wash again!
Thanks Craig, Frederic and Paul - some really useful shots and comments. It looks really good .
I'll let you know how I get on.
Paul - presumably you ground off the Alfa logo from the other cover and painted over?
Also regarding Blogs - Paul I cant see your blog on this site - you've baffled me ? . It is not listed in the Blogs list - in fact the only Blogs I can see are:
my own (Stratos Fear)
NS Corse (Turbonutter)
Ducatiman
and a User Guide to SEC Blogs
Are there others?
Peter
Last edited by Stratos Fear; 27-01-2017 at 09:45.
I don't have a blog here just a build thread. http://www.stratosec.com/Forum/showt.../1212-LB-in-NZ
Yes, I ground the Alfa script off the coil cover then media blasted it before painting, you can't see that there was ever anything there.
Last edited by Fingers; 27-01-2017 at 17:45.
Paul.
Sat in a real one, may never wash again!
Frederic - it's a straight swap on the 24V engine.
Bookmarks