PAG 15 wheels!

[BAS]

Ok I've been busy with tape measure trying to work out the off set's to order for the PAG's.

My current setup is:-

Image split rims

Front 8x15 ET -14mm
Rear 12x15 ET -26mm with 9mm spacers so -35mm

There seems to be some confusion regarding the Hawk Coffin Spokes ET measurements, but what I would say is that if a possitive ET was used on the front the wheel rim would run very close the top ball joint, with an ET 0 the clearance on my car using 4 stud hubs and Thema Turbo disks would only be 2-3mm to the ball joint cover and approx 6mm to the joint.

I don't know if the 5 stud conversion has a different hub face position to my set up, could someone with the coffins on measure the distance between the wheel rim and the top ball joint on a Hawk to confirm my findings.

Hi,

the ET measurement for the coffin spokes are:

ET -34 (12" rim)
ET 10 (8"rim)

Enzo

[GrahamH]

5 stud coffins are ET0 and ET-50 as stamped on the wheels. Not sure how accurate these figures acually are as I measured the rear rim and worked it to out be ET45. Will double check.

[Strat Fan]

I agree with Graham, Hawk wheels are- Front ET 0, Rear ET -45.
Roin Technologies wheels are- Front ET 7, Rear ET -36.5,
TMB Racing are quoted as- Front ET 21(?), Rear ET -32.
Not sure what is going on with the TMB fronts. All are listed as 8 x 15" Front, 12 x 15" rear.
Roin also do a 9 x 15" ET -14.7 & a 10 x 15" ET -25.

[BAS]

With the rear ET -45 for the coffin's this would explain why I can't fit my Leada struts. with 345's and the ET -35 the tyre rubs the strut body.

[ChrisCar6]

I have several sets of Revolution wheels of different ages - all 8" with ET0. On the front some need 10mm, some 5mm and some no spacer to clear the caliper!

[Allora#2]

I agree with Graham, Hawk wheels are- Front ET 0, Rear ET -45.
Roin Technologies wheels are- Front ET 7, Rear ET -36.5,
TMB Racing are quoted as- Front ET 21(?), Rear ET -32.
Not sure what is going on with the TMB fronts. All are listed as 8 x 15" Front, 12 x 15" rear.
Roin also do a 9 x 15" ET -14.7 & a 10 x 15" ET -25.

Hi Craig,
my current setup about the TMB Racing is Front ET 19 and Rear ET-34 the ET make on order!
with Michelin TB15 Front 18/60/15 (215/55/15) and Rear 26/21/15 (295/40/15)
Enzo

BTW, to be on order by "group4wheels" for Marcolino Prtotipo Stratos PAG 8 & 9 x15 front ET 0 and rear ET-12

[BAS]

Calling all round arch grp4 car's, if you fitted 10" rears what ET did you use?

[Allora#2]

the rims for Marcolino Stratos are arrived now and
i am speechless that looks fantastic, thanks to Jonathan
http://www.group4wheels.com/index.php
i post picture soon.

Enzo

[BAS]

Can't wait to see mine!!

[Allora#2]

the rims for Marcolino Stratos are arrived now and
i am speechless that looks fantastic, thanks to Jonathan
http://www.group4wheels.com/index.php
i post picture soon.

Enzo

here they are the promised pictures on Group4wheels side!
http://www.group4wheels.com/customers.php
thanks Jonathan.