I think I will be going for a correct damper extension. My research says the Gaz dampers have a 6 inch extension. I have spent the afternoon checking and measuring. Beyond 6 inches the drive shaft has no further play and starts to pull out of the inner CV joint at 7 inches it is possible to pull it right out due to the free movement gained in the inner joint. I am quite satisfied the installation of the engine is correct with shafts being horizontal with weight on the axle, and angled slightly back from the engine to rotate the cv ball bearing.
With 325 lb in springs they compress 2.5inches laden but without driver/passenger. I am happy with this as approximately the midpoint on a 5.75inch suspension travel.
Bookmarks