Nice progress Neil.
May will be fine for me. Actually May next year will probably be fine for me!
Let us know when you want some cash.
From the work I've done on my catches , I'm thinking the head of the clevis pins may need thinning down a bit to fit under the body of the top catch?
I found that the dimensional tolerance on the levers were 'somewhat lax'! I had pins made to identical sizes and the fitted some catches but not others,took a bit of messing and having another pin made at a slightly different size (distance from head to the 'slot' for the clip).
Also had to prise open on the bodies very slightly to make it fit over as mentioned above.
Last edited by LPH_UK; 01-05-2018 at 12:47.
Leigh - that was my experience too - but it all worked out in the end!
Bookmarks