Is this why you need Phil? I'm not sure if it's 12v or 12v Cloverleaf yet though! If it's what you need can you measure the OD on the throttle body and AFM so I can compare it?
Guy
Is this why you need Phil? I'm not sure if it's 12v or 12v Cloverleaf yet though! If it's what you need can you measure the OD on the throttle body and AFM so I can compare it?
Guy
Last edited by Guy Mayers; 14-07-2014 at 19:34.
An alternative if the one guy has is wrong, could be a silicone elbow with a couple of bolt in take offs for the small hoses.....
Hi Neil... Did think of this option... It's my last resort option at the mo.. Thanks for posting.... PhilOriginally Posted by turbonutter
Hi Guy... That looks like it to me... Will get it measured tomorrow as I don't have the car at home at the mo... Will be in touch first thing tomorrow .... Thanks very much for looking this out.. Phil
No problem Phil, I can post it on Wednesday easily enough.
Guy
Thanks again Guy
Hi Guy
As I say unfortunately the car is not with me !
However the guy at the garage has measured the O/D of the rubber pipe
69mm on the AFM end
84mm on the Plenum end
(I thought they should be the same)
Cheers
Phil
Home in a couple of hours Phil, it's on the dining room tableso I'll remember to measure it and let you know. If it's right it'll be on the way to you tomorrow or Thursday.
Guy
I've measured the rubber tube I've got Phil and it looks like it's got a 69mm ID at the AFM and 84mm ID at the Throttle Body. If your guy measured the OD of the rubber pipe then mine will be too big. Hopefully he's measured the OD of the ally that the tube connects to! Either way I'll bung it in the post to you as soon as I can, if it's too big you can try wrapping a bike inner tube around the AFM and Throttle Body until it fits nice and snug?
Cheers
Guy
Hi Guy
Thanks very much, could you put it on next day delivery and PLEASE let me know how much I owe you.
I wll keep you posted how it fits
Thanks again for your efforts
Cheers
Phil
Posting Permissions
Reply With Quote
Bookmarks