Hawk and Beta parts

[Lancialulu]

If I don't ask, I'll never know...

Wanted:

Pair of Beta drive shafts.
Hawk rear 'A' arms and tie rods (trailing links)
Hawk front lower arms, upper arms and tie rods
Front Hawk coilovers
132 front uprights
Hawk steering arms
132 4 stud front hubs
Hawk (or similar) rear window

I have Hawk/Transformer variious suspnesion parts (not the uprated ones) going spare but cannot post to Outer Mongolia....

[ChrisCar6]

I have a pair of old bushed rear A frames.

[StruanR]

I have 4 stud hubs... somewhere in the workshop.

[Guy Mayers]

I have a perspex rear screen you could use as a pattern? It may be slightly smaller than standard though.

FOS Polonez are an alternative to the Fiat 132 stub axles but I can't see any on eBay.pl at the moment. I believe Gerry carries a small stock?

Guy

[LM mic]

Are these similar to 132 or polonez spindles ?
http://www.ebay.co.uk/itm/FIAT-124-S...item5d5dc64c2e

[ProtoTipo]

Are these similar to 132 or polonez spindles ?
http://www.ebay.co.uk/itm/FIAT-124-S...item5d5dc64c2e

Hi Michel,

No, those are the thinner 124 stub axle.
I do know where they are available new. Here:
http://www.ebay.com/itm/Fiat-Dino-12...2a7eef&vxp=mtr
or here:
http://www.ebay.de/itm/Achsschenkel-...3D361382899894

I just wondered if there were any spare secondhand ones? Or four stud front hubs, following a 5 stud upgrade?

[ProtoTipo]

Hi Michel,
No, those are the thinner 124 stub axle.

Having said that, there is one 124 Spider that is fitted with the stronger (132) type stub axle;
The 124 Spider Volumex. The mention of 124 VX can confuse some stub/hub/wheel bearing listings.

[ProtoTipo]

I have 4 stud hubs... somewhere in the workshop.

Thanks Struan.
Let me know what you've got spare, and what you want for them?

[ProtoTipo]

I have a pair of old bushed rear A frames.

I know you have, and where you got them from!!
Seriously, let me know what you want for them Chris?

[john]

I have Beta driveshafts Chris.