Should I have asked what the rate of commission was before I posted that?Originally Posted by Guy Mayers
Should I have asked what the rate of commission was before I posted that?
"You can lead a horse to water, but a pencil must be lead"
Stan Laurel
probably about the same as yours Craig?
I got this a while ago, as well as another same diameter wheel to donate some leather trim:
Thanks for the replies same thoughts as yourselves just it was original,price wise Gerrys is similar when you add the vat but a perfect reproduction. That's the way I'm going just wanted you're thoughts on it. Much appreciated.
Kenny
That's proof that an angle grinder can't do every job in the workshop.
just out of interest, what's the PCD on the replica wheels (75mm?) and if I wanted to get one onto my Alfa steering column, any thoughts on best way to do it - I currently have a Momo adapter for a Sparco 70mm PCD wheel. Eg are there 75mm available anywhere or on my own to make something up (eg tap new set of holes into the Momo adapter).
Other question - does anyone know what the dish depth measurement is on these wheels?
Regards
Paul
Hi Paul, PCD on the wheel I have is 75mm, I've got it mounted to a 1970's Fiat 124 Spider boss. The original may have been 74mm?
Placing a flat edge across the face of the wheel the depth to the face of the centre of the wheel is 47mm. The rim is 30/31mm which.
What's your donor car? 164?
Guy
Posting Permissions
Reply With Quote
Bookmarks