037 Recreation

[pim]

OK next challenge: i have almost all lights except from the number plate light. They are not all the same on the existing cars but this one seems mostly used. Anyone an idea what car this comes from?

[Allora#2]

OK next challenge: i have almost all lights except from the number plate light. They are not all the same on the existing cars but this one seems mostly used. Anyone an idea what car this comes from?

4406529 COPPIA LUCI TARGA POSTERIORE FIAT DUCATO E VARIE

http://www.ebay.it/itm/4406529-PLAST...UAAOSwNsdXQy5g

saluti Enzo

[pim]

4406529 COPPIA LUCI TARGA POSTERIORE FIAT DUCATO E VARIE

http://www.ebay.it/itm/4406529-PLAST...UAAOSwNsdXQy5g

saluti Enzo

Hi Enzo, Thanks, just asked for postage, is 30 Euro's So now i know what to look for.

Where has your 037 gone to? Is there a possibility to get in touch with him/her to share build info??


Cheers,

Pim

Pim

[pim]

Ok ,

Some good news from Mick Covill ( Rally Legend Replica's ), He has just finished my front subframe including suspension and steering parts. Also had the doors made from fibreglass as that was the only body parts i was missing.
Probably will be collecting them soon, taking the ferry at Hull with my 900cc Fiat Panda
Love to see the UK again, last time i was there with the Stratos at Stoneleigh, seems like ages ago.
Cheers,

Pim

[pim]

As the VX supercharger is a bit to small to get some more power i am going to try another supercharger that looks almost the same as the volumex: Toyota SC14 not common in Europe but in the States and Australia there seem to be some around.
Just got this one via E bay, they are a lot cheaper than the Eaton superchargers. Hope this will work.
Now looking for a 2 ltr ( or bigger ) 16 valve engine that has the looks of the Abarth 16valve from the 037. Has to have the intake on the left and exhaust on the right.
Here some pictures of my supercharger.

[strat24v]

Think the later small Mercedes convertible has a screw supercharger as standard, good for 1 bar boost.

[pacorron]

Think the later small Mercedes convertible has a screw supercharger as standard, good for 1 bar boost.

I have use it, in combination with a delta integrale 16 v Gr.A engine in my 037 recreation I will post some pictures soon , I take it from a C32 AMG

[Piers037]

Now looking for a 2 ltr ( or bigger ) 16 valve engine that has the looks of the Abarth 16valve from the 037. Has to have the intake on the left and exhaust on the right.

I am going to use a 16V "Intergrale" head on my replica. It is possible to swap the cams 180 degrees. There is a guy in Spain who has done this modification on a Seat/Fiat RWD Rally car. If you look on the Guy Croft web site there is some information.

I will also make my own valve covers with Abarth cast into the top.

Cheers

Piers

[ProtoTipo]

Heads are manufactured, 10 minutes away from me:

[pim]

Hi Piers,

Any progress with youre 037 project?

Pim

I am going to use a 16V "Intergrale" head on my replica. It is possible to swap the cams 180 degrees. There is a guy in Spain who has done this modification on a Seat/Fiat RWD Rally car. If you look on the Guy Croft web site there is some information.

I will also make my own valve covers with Abarth cast into the top.

Cheers

Piers